End of Content.
R42,825.00 Excl VAT
Out of stock
The HI839800 COD Test Tube Heater is an easy to use thermoreactor constructed of durable materials. The aluminum block incorporates a 25 vial capacity and a well for a reference temperature probe. Its well-marked user interface provides intuitive operation, equipped with two arrows to set the built-in timer and a temperature button with two predefined temperature settings: 150ºC and 105ºC. Additional features include status indicator lights, a thermal fuse to prevent overheating, and continuous LCD display.
The HI839800 COD Test Tube Heater features two predefined temperature profiles: 150℃ and 105℃. Digestions for chemical oxygen (COD) and total phosphorus are conducted at 150℃, while total nitrogen digestions are conducted at 105℃. The test tube heater automatically heats up to the set temperature, holding it until the countdown timer has finished. Once the timer has ended, a beep will sound and the heating element will turn off. The outer casing of the HI839800 remains cool to the touch, even during a timed digestion. An optional lab safety shield and test tube cooling rack provide a complete setup for sample digestions.
Predefined Temperature Settings – The test tube heater features two predefined temperature profiles at 150℃ (221℉) and 105℃ (301℉) that can be selected at the press of a button.
Temperature Alerts – The HI839800 alerts users in the event that the temperature of the heating block is either above or below the set temperature. A timer icon reminds users to wait until the heating block has cooled or warmed up before inserting their samples.
Built-in Timer – A built-in countdown timer of up to 180 minutes allows users to easily set the required digestion time by simply pressing the up and down arrows. Once a time has been set and the heating element is stable, a press of the START button begins the digestion procedure.
Status Indicator Lights – Three LED lights are featured on the HI839800. A green LED indicates the heater has been turned on; a yellow LED indicates when the heater is actively heating up to a set temperature; a red LED indicates when the heater goes above 50℃, reminding the user that the aluminum element is hot.
Overheating Prevention – The HI839800 contains a thermal fuse that prevents overheating. Should overheating occur, the heater automatically shuts down and all LED indicator lights turn off.
Reference Temperature Well – In addition to the 25 vial capacity of the aluminum heating block, a small well is available for a temperature probe for users that wish to verify their heating block.
Two Operating Modes – The HI839800 features two operating modes: idle and heating. Idle mode is the default mode in which the heater measures and displays the current temperature, target temperature, set reaction time, and an “idle” tag. Heating mode is activated when users press the START button; it starts when actively heating and continues during the countdown timer.
Continuous LCD Display – The block temperature is continuously displayed on the easy to read LCD display, even when there is no active temperature program running. All relevant information in addition to temperature are easily visible during idle and heating mode.
Error Messages – Messages on display alerting to problems including high or low temperature, hot surface, or heating system malfunction.
| Weight | 3.51 kg |
|---|---|
| Parameter | Chemical Oxygen Demand, Nitrogen, Phosphorus |
| Temperature Accuracy | ±2°C (@ 25°C) |
| Temperature Range | -10°C to 160°C |
| SKU | HI839800-02 |
|---|---|
| Product Name | COD Test Tube Heater – HI839800-02 |
| Quote Required | Yes |
| Power Supply | HI 839800-01 115 Vac; 60 Hz; 250 W |
| Environment | 5 to 50°C (41 to 122°F) |
| Dimensions | 190 x 300 x 95 mm (7.5 x 11.8 x 3.7″) |
| Weight | approximately 4.8 kg (10.6 lb) |
| Ordering Information | HI839800 is supplied with a power cable and instruction manual. |
| Reaction Temperature | 105°C or 150°C (221°F or 302°F) |
| Temperature Stability | ±0.5°C |
| Temperature Range | -10°C to 160°C |
| Temperature Accuracy | ±2°C (@ 25°C) |
| Capacity | 25 vials (dia 16 x 100 mm), 1 receptacle for a stainless steel reference thermometer |
| Warm up time | 10 to 15 minutes, depending on selected temperature |
| Operating Mode | timed (0 to 180 minutes) or infinity mode |
| Heater Block Material | aluminum |
HI839800 is supplied with a power cable and instruction manual.
Availability on Request
Buy Now
Availability on Request
Buy Now
Availability on Request
Buy Now
Availability on Request
Buy Now
Availability on Request
Buy NowTo empower customers to achieve quality
by supplying intuitive, accurate, and reliable analytical instruments with exceptional customer service and value.
We take pride in every product we build. From an original idea, to a completed product ready for testing. We oversee every aspect of the manufacturing process. It is this level of attention to detail that sets us apart.
To empower customers to achieve quality by supplying intuitive, accurate, and reliable analytical instruments with exceptional customer service and value.
We take pride in every product we build. From an original idea, to a completed product ready for testing. We oversee every aspect of the manufacturing process. It is this level of attention to detail that sets us apart.
To empower customers to achieve quality by supplying intuitive, accurate, and reliable analytical instruments with exceptional customer service and value.
We take pride in every product we build. From an original idea, to a completed product ready for testing. We oversee every aspect of the manufacturing process. It is this level of attention to detail that sets us apart.
