pH Transmitter with 4-20 mA Galvanically Isolated Output - HI8614-With LCD

Description

Two-Wire pH Transmitters

HI 8614 is 2-wire water-resistant transmitter specially designed for long distance measurement of pH in industrial applications.

Two-wire transmitters are widely used for process control in industry. These instruments are particularly useful in industrial conditions where electrical interference is an important factor

By galvanically isolating the signals, any interference created is prevented from reaching the transmitter. Industrial environments are often associated with corrosive conditions, therefore any instrumentation used must be resistant to liquids and corrosion. Hanna transmitters meet all of these criteria and they only use two wires which reduces costs and eliminates the need for an expensive coaxial cable. Two-wire transmitters are ideal when used in remote applications that do not have AC power available.

HI8614 pH Transmitter FEATURES/BENEFITS:

Automatic Temperature Compensation (ATC)

Temperature compensation is performed by the transmitter’s ATC (Automatic Temperature Compensation) circuitry when measurements are taken with a temperature probe attached; if ATC is not required, it is also possible to substitute a fixed resistor for the temperature probe.

IP Protection

The unit is enclosed in a protective casing conforming to IP 65 standards.

Flexible for Your Needs

The transmitter can be connected to any Hanna controller that accepts analog input.

Easy Calibration

Calibration is performed by the adjustment of two independent trimmers — slope and offset.

BNC Connector

The transmitters use a universal BNC socket for quick and secure connection to any electrode with a BNC connector.

Isolated Input

The input is isolated from the current loop to eliminate problems related to ground loop, low insulation cables, multiple electrode connections, and a common mode voltage of up to 100V ensures true differential readings

Version with LCD

HI8614”L” versions allow easy verification and monitoring of measured values and is easier to calibrate and maintain.

Easy Installation

HI8614 is very easy to install, wall mounted transmitter. It is supplied with 4 mounting screws

Additional information

Weight	0.92 kg
Parameter	pH
pH Accuracy	±0.02 pH; ±0.02 mA
pH Calibration	offset: ±2 pH; ±2.2 mA; slope: 86 to 116%; ±0.5 mA
pH Range	0.00 to 14.00 pH; 4–20 mA
pH Resolution	(for “L” models) 0.01 pH; 0.01 mA

Specifications

SKU	HI8614LN
Name	pH Transmitter with 4-20 mA Galvanically Isolated Output – HI8614-With LCD
pH Range	0.00 to 14.00 pH; 4?20 mA
pH Resolution	(for “L” models) 0.01 pH; 0.01 mA
pH Accuracy	?0.02 pH; ?0.02 mA
pH Calibration	offset: ?2 pH; ?2.2 mA; slope: 86 to 116%; ?0.5 mA
pH Temperature Compensation	fixed or automatic from 0 to 100?C (32 to 212?F) with HI76608 probe
pH Input impedence	1012 Ohm
Analog Ouput Signal	4-20 mA (isolated)
pH Electrode	pH electrode with BNC connector
Display	LCD only for HI8614LN
Power Supply	HI8614N: 18-30 VDC; HI8614LN: 20-36 VDC
Environment	0 to 50?C (32 to 122?F); RH max 95% non-condensing
IP Rating	IP65
Dimensions	165 x 110 x 71 mm (6.5 x 4.3 x 2.8”)
Weight	1 kg (2.2 lb.)

Ordering Info

HI8614N and HI8614LN (with display) is supplied with instructions.

Manuals

pH Transmitter with 4-20 mA Galvanically Isolated Output – HI8614-With LCD