Hanna presents a series of combination pH electrodes incorporating over 20 years of electrode manufacturing experience. The most advanced feature of this series is the electrode shape with a flat tip, virtually eliminating deposits that can foul the electrode, significantly reducing necessary maintenance. This characteristic makes flat tip electrodes ideal for continuous in-line monitoring and for solutions containing aggressive chemicals.
Self-cleaning flat tip sensor for significantly reduced maintenance.
Provided with an internal matching pin that can avoid typical problems caused by grounding loop current.
3/4” NPT external thread on both ends for easy installation.
Select the flat tip electrode that best fits your process requirements by choosing from the following technical characteristics:
Sku
Cable Length
Connection
Internal Temperature Sensor
Glass Type
Junction
HI1006-4005
5m (16.4′)
BNC
No
Fluoride Resistant (HF)
PTFE
HI1006-2405
5m (16.4′)
BNC
Pt1000
General Purpose (GP)
PTFE
HI1006-3005
5m (16.4′)
BNC
No
High Temperature (HT)
PTFE
HI1006-3007
7m (22.97′)
BNC
No
High Temperature (HT)
PTFE
HI1006-3205
5m (16.4′)
BNC
Pt100
High Temperature (HT)
PTFE
HI1006-2005
5m (16.4′)
BNC
No
General Purpose (GP)
PTFE
HI1006-1005
5m (16.4′)
BNC
No
Low Temperature (LT)
PTFE
HI1016-3005
5m (16.4′)
BNC
No
High Temperature (HT)
Ceramic
HI1006-1007
7m (22.97′)
BNC
No
Low Temperature (LT)
PTFE
HI1006-2010
10m (32.8′)
BNC
No
General Purpose (GP)
PTFE
HI1006-2015
15m (49.2′)
BNC
No
General Purpose (GP)
PTFE
HI1006-3010
10m (32.8′)
BNC
No
High Temperature (HT)
PTFE
HI1006-2210
10m (32.8′)
BNC
Pt100
General Purpose (GP)
PTFE
HI1006-1205
5m (16.4′)
BNC
Pt100
Low Temperature (LT)
PTFE
HI1006-2205
5m (16.4′)
BNC
Pt100
General Purpose (GP)
PTFE
HI1006-2305
5m (16.4′)
Direct/ Color Coded Wires
Pt100
General Purpose (GP)
PTFE
HI1006-2505
5m (16.4′)
Direct/ Color Coded Wires
Pt1000
General Purpose (GP)
PTFE
HI1006-4205
5m (16.4′)
BNC
Pt100
Fluoride Resistant (HF)
PTFE
HI1006-2215
15m (49.2′)
BNC
Pt100
General Purpose (GP)
PTFE
HI1006-3715
15m (49.2′)
BNC
Pt100
High Temperature (HT)
PTFE
Junction
Three junction types are available:
Annular non-clogging PTFE junction, for testing solutions with high content of suspended solids or for high pressure installation
Open junction, ideal for wastewater analysis
Ceramic junction
Connection Type
Electrodes are wired for direct connection to a transmitter or process controller, or with the standard BNC connector.
Glass Sensor
Hanna has developed four types of specialized glass. First is a durable sensor glass for general purpose, industrial use. This glass can withstand the stress of daily use. The remaining types of electrode glass allow continuous monitoring in highly acidic solutions containing fluoride ions, as well as high or low temperature process and streams significantly increase the electrode life.
Built-in Amplifier
Models with a built-in amplifier are necessary for long distance measurements, where it is not possible to install a transmitter. The internal amplifier can be powered directly from select Hanna process controllers or a power source that supplies the appropriate voltage.
Temperature Sensor
The pH electrodes with built-in 3-wire Pt100 or Pt1000 temperature sensor allow for the temperature compensation of pH readings as well as temperature measurements.
Cable Length
Non-amplified electrodes are provided with a 5, 10 or 15 m cable (16′, 33′ or 49′), while the amplified models are provided with a 15, 25, 50 or 75 m cable (49, 82, 164 or 246′).
