WALL MOUNTED PROCESS CONTROLLERS

Hanna Wall Mounted pH, ORP, and Conductivity Controllers are specifically designed to meet your process control requirements.  The controllers come equiped with power relays operating at a maxium of 2A (240V).  Electrodes can be installed quicky and easily.  Simply plug the universal BNC or DIN connector over the socket and twist it into a secured position.  This feature greatly improves the reliability of your instrumentation by assuring a positive connection.  This feature greatly improves the reliability of your instrumentation by assuring a positive connection.  Accurate measurements are displayed on a large LCD, enabling the operator to check the controllers readings easily.

 

Features:

 

o   Reliable, High Performance Wall Mounted Controllers

o   Alarm Feature

o   Isolated Recorder Output

o   High Impedance Input

o   Quality Construction

o   HI2X Advanced Controllers

o   Simple to Use

o   Save Money with Custom Programs

o   Fail Safe Protection

o   Differential Input (Matching Pin)

o   Password Protection

o   Simple Installation

o   Mechanical Dimensions

 

 

 

Hanna Wall Mounted pH, ORP, and Conductivity Controllers are specifically designed to meet your process control requirements.  The controllers come equiped with power relays operating at a... read more »
Close window
WALL MOUNTED PROCESS CONTROLLERS

Hanna Wall Mounted pH, ORP, and Conductivity Controllers are specifically designed to meet your process control requirements.  The controllers come equiped with power relays operating at a maxium of 2A (240V).  Electrodes can be installed quicky and easily.  Simply plug the universal BNC or DIN connector over the socket and twist it into a secured position.  This feature greatly improves the reliability of your instrumentation by assuring a positive connection.  This feature greatly improves the reliability of your instrumentation by assuring a positive connection.  Accurate measurements are displayed on a large LCD, enabling the operator to check the controllers readings easily.

 

Features:

 

o   Reliable, High Performance Wall Mounted Controllers

o   Alarm Feature

o   Isolated Recorder Output

o   High Impedance Input

o   Quality Construction

o   HI2X Advanced Controllers

o   Simple to Use

o   Save Money with Custom Programs

o   Fail Safe Protection

o   Differential Input (Matching Pin)

o   Password Protection

o   Simple Installation

o   Mechanical Dimensions

 

 

 

No results were found for the filter!
HI9934-2  | Digital TDS Controller | Hydroponics and Fertigation
HI9934-2 | Digital TDS Controller |...
HI 9934 also provides an isolated output signal which is user selectable between 0-20 or 4-20 mA.
R 17,641.00 *
HI9931-2 | Industrial Grade EC Controller with Proportional Fertilizer Dosing for Hydroponics Applic
HI9931-2 | Industrial Grade EC Controller with...
HI 9931 is a wall mounted meter that measures and controls conductivity in the 0 to 10 mS/cm range. A single set point allows for proportional dosage of fertilizer solutions. The proportional settings can be fine tuned through two...
R 17,641.00 *
HI9935-2 | Digital pH & TDS Controller
HI9935-2 | Digital pH & TDS Controller
HI 9935 is a pH and TDS controller for fertilizer solution dosage in hydroponics. HI 9935 measures pH from 0 to 14 and TDS from 0 to 1999 mg/L (ppm). Two separate set points can be adjusted from 4 to 7 pH and 900 to 1800 ppm (mg/L). The...
R 17,702.00 *
HI9914-2 | Wall Mounted Fertigation Controller
HI9914-2 | Wall Mounted Fertigation Controller
HI 9914 is a wall mounted fertigation controller, designed to meet specific process control requirements in agricultural, horticultural and hydroponics applications. The controller is provided with two measuring channels, one for pH and...
R 19,695.00 *
HI9920-2 | Industrial Grade ORP Controller with Proportional Dosage (Direct 230V output)
HI9920-2 | Industrial Grade ORP Controller with...
HI9920 is an ORP controller with a single set point for user selectable dosage of reducing or oxidizing solutions.
R 17,641.00 *
HI9910-2 Industrial Grade pH Digital Wall Mounted Single Setpoint pH Controller
HI9910-2 Industrial Grade pH Digital Wall...
HI 9910 is a pH controller specially designed for proportional dosage of acid or alkaline solution. Two separate set points can be adjusted by the user from 6 to 8 pH and 500 to 900 mV. The relays are activated when the pH exceeds or the...
R 17,641.00 *
Viewed