Hanna Instruments Worldwide
The Hanna Advantage: A Worldwide Leader in Technology and Innovation 100% Quality  360 Value
Contact Hanna: +27 (0) 11 615-6076
Hanna Instruments Worldwide
Customer Support: +1 (800) 426-6287

Wall Mounted pH Controller and Pump - BL7916

R28,162.00 Excl VAT

Availability on Request

The BL7916 combines a pH meter with a chemical dosing pump in order to maintain a desired set point in process applications.

  • Two advanced instruments in one compact unit.
  • Convenient installation with all controls on front panel.
  • Widely used in plating, wastewater treatment, water treatment and swimming pools.

Description

Easy Installation

  • Designed with mounting holes built into a rugged base, BL7916 is simple to install. All of the controls and pump assemblies are conveniently located on the front of the unit.

Proportional Dosing

  • A proportional control slows down the stroke rate as the measured value approaches the user selectable set points, avoiding overdosage of chemicals. This feature makes the pump’s dosing more accurate, saves chemicals and eliminates unnecessary and costly corrections to your process, especially with slow reacting chemicals.

Rugged Construction

  • BL7916 is housed in rugged, fiber-reinforced polypropylene IP55 rated casings to protect from hazardous spills and splashes. PVDF, FPM/FKM and PTFE materials are used for all parts that come into contact with liquid to resist corrosion caused by chemicals.

Isolated Recorder Output

  • To enhance troubleshooting and the ability to record data while monitoring, simply attach a recording device to the instrument’s 4 to 20 mA output contacts, conveniently located on the front panel, to obtain a copy of the results on demand.

Simple Pump Action

  • A positive displacement solenoid with few moving parts makes the BL7916 more reliable than motor driven pumps since there is no rotating parts, gears or cams; drastically reducing any chance of mechanical failure.

Auxiliary Dosing Contacts

  • Allows the user to attach a mixer or priming pump that is activated only when the pump is dosing.

Additional information

Weight 4.69 kg
Parameter

pH

pH Accuracy

±0.01 pH

pH Calibration

manual 1 or 2 point

pH Range

0.00 to 14.00 pH

pH Resolution

0.01 pH

Specifications

SKU BL7916-1
Name Wall Mounted pH Controller and Pump – BL7916
pH Range 0.00 to 14.00 pH
pH Resolution 0.01 pH
pH Accuracy ?0.01 pH
pH Calibration manual 1 or 2 point
pH Temperature Compensation fixed by resistor; 2-wire pt100 optional
pH Input impedence 10?? Ohm
pH Dosing Relay proportional, acid or base, user selectable
pH Dosing Set Point manual adjustment through coarse/fine trimmers
pH Proportional Band fixed 1.5 pH unit band; adjustable by changing resistor
Level Dosing Relay dosing pump operated by consent feature through level input connection
Dosing Terminals Isolated, 2A, Max. 240V, resistive load, 1,000,000 strokes
Alarm Relay Set Point fixed; based on pH setpoint
Alarm Relay Range activated when pH is outside 2 pH units from setpoint
Over Current Protection 250V fuse
Self Priming maximum self-priming height is 1.5 m (5 ft.).
Analog Output 4 to 20 mA (isolated)
Display segmented LCD
Power Supply 115V ?15%; 50/60Hz (40W)
Environment 0 to 50?C (32 to 122?F); RH max 95% non-condensing
IP Rating IP55
Dimensions 221 x 142 x 181 mm (8.7 x 5.6 x 7.1”)
Weight Approximately 5 kg (11 lb.)

Ordering Info

BL7916 is supplied with polyethylene tubing, discharge and suction valves, power cable and instructions.

Manuals

Wall Mounted pH Controller and Pump – BL7916