BL983320-1 Conductivity Mini Controller

BL983320-1 Conductivity Mini Controller
R 4,462.00 *

Prices excluded VAT and delivery costs

Delivery time approx. 2 to 4 weeks

  • BL983320-1
The BL983320 is a compact, panel mounted, process controller for measuring electrolytic... more
Product information "BL983320-1 Conductivity Mini Controller"
The BL983320 is a compact, panel mounted, process controller for measuring electrolytic conductivity (EC) of a process stream that is within the 0.0 to 199.9 ?S/cm range. The device features a large LCD with protective cover. Users may choose from automatic or manual dosing modes. When in automatic mode the dry contact relay is activated when a reading is above the set point. The relay can be used to activate a solenoid that switches from one DI (deionized) tank to another or to open a valve that will allow lower EC water to flow into a tank being monitored in order to lower its EC. The BL983320 can also be used to monitor the quality of water produced from ion exchange, reverse osmosis (RO) or distillation.
  • Multicolor LED Indicator
  • Fire Retardant Casing
  • Fire Retardant Casing

 

 

 

 

 

BL983320

Adjustable Dry Contact Dosing Relay

The BL983320 features a dosing relay that is activated when the reading is above a user programmable set point.

Programmable Overdose Protection

For enhanced safety the mini controller can be programmed to deactivate the dosing relay if the set point is not reached within a specified time interval. The overdosing timer is programmable from 5 to 30 minutes or disabled.

Relay Control Override

With the flick of a switch the mini controller's relay can be disabled (Off), placed in control (Auto), or be activated for manual operation (On) which is useful for priming a dosing pump.

Multicolor LED Indicator

Multicolor LED indicator allows an operator to quickly check the status of the controller.

  • Green = Meter in measurement mode and reading is below the set point.
  • Orange/Yellow = Reading is above the set point and the relay is activated.
  • Blinking Red = Indicates an alarm condition such as when the maximum dosing time has been exceeded.

BL983320

Fuse Protected Dosing Contacts

The relay dosing contact is rated for up to a 2A load and is fuse protected.

Labeled Termination Connections

Quick-connect terminal blocks are clearly labeled for easy connection to power, conductivity probe and relay that can be used to operate a dosing pump, valve, audible alarm, or light

HI7634

 

1/2" NPT Male Threaded Amperometric Probe for Mounting In-line*

The BL983320 mini controller uses the HI7634-00 conductivity probe that is available with different cable lengths.

*HI7634-00 is not included and must be ordered separately

 

BL931700

 

Front View

Installation cut-out dimensions are provided as well as outside panel dimensions.

 

BL931700

Side View

Adjustable location brackets allow the controller to slide easily and securely into place.

 

Specifications

 

Range 0.0 to 199.9 ?S/cm
Resolution 0.1 ?S/cm
Accuracy (@25°C/77°F) ±2% full scale
Calibration manual, with CAL trimmer
Dosing Relay maximum 2A (fuse protected), 250 VAC, 30 VDC
Dosing Selection relay activated (contact closed) when the measurement is greater than the setpoint
Setpoint adjustable from 0 to 199.9 ?S/cm
Overtime adjustable, typically from 5 to approximately 30 minutes
Temperature Compensation automatic from 5 to 50°C (41 to 122°F) with beta =2%/ºC
Power Supply models “-0”: 12 VDC adapter (included)
models “-1”: 115/230 VAC; 50/60Hz
Dimensions 83 x 53 x 99 mm (3.3 x 2.1 x 3.9’’)
Weight models “-0”: 200 g (7.1 oz.)
models “-1”: 300 g (10.6 oz.)
Ordering Information BL983320-1 (115/230 VAC) and BL983320-0 (12 VDC) are supplied with mounting brackets, transparent cover and instruction manual.
Warranty 2 years

 

Manual:

 

pdf manBL_983320

 

 

 

Related links to "BL983320-1 Conductivity Mini Controller"
Read, write and discuss reviews... more
Customer evaluation for "BL983320-1 Conductivity Mini Controller"
Write an evaluation
Please enter these characters in the following text field.

The fields marked with * are required.

Viewed